Contact Information:
819 South Lincoln Street
Longmont, CO 80501

Phone: 303-702-1529 
Fax: 303-702-1534

E-mail:
   Sales - bobb@stvrainmfg.com
   Quotes - Quotes@stvrainmfg.com

Facilities

The following is a comprehensive listing of our machining and quality capabilities.
Printable Version (18 kB)

  • CNC Mills:
    • GF AgieCharmilles Mikron UCP 600 Vario 5 Axis with Rotary Tilting Table
      • Specifications:
      • 18” diameter rotary table size
      • 20.87 X 17.7 X 17.7 table travel in X, Y, Z
      • 115 degrees B axis rotation
      • 360 degrees C axis rotation
      • 20,000 RPM maximum spindle rotation
      • 30 station tool changer
      • 9 second tool change time
      • 860 X 860 X 860 ipm rapid traverse in X, Y, Z X C
      • .00008” positioning accuracy
      • .00004” repeatability
      • Heidenhain iTNC 530 Controller
    • Kitamura Mycenter HX400iF CNC Horizontal Milll
      • Specifications:
      • 15.7” X 15.7” table size
      • 28.9” X 24” X 24” table travel in X, Y, Z
      • 13,000 RPM maximum spindle rotation
      • 50 station tool changer
      • 1.0 second tool change time
      • 1,969 X 1,969 X 1,969 ipm rapid traverse in X, Y, Z X C
      • +/- 0.000078” positioning accuracy
      • +/- 0.000039” repeatability
      • Fanuc Series 16i-MB Controller
    • Kitamura Mycenter-4Xi CNC 3 Axis Mill
      • Specifications:
      • 20.6" X 43.3" table size
      • 40" X 20" X 20" table travel in X, Y, Z
      • 20,000 RPM maximum spindle rotation
      • 30 station tool changer
      • 1.4 second tool change time
      • 1,969 X 1,417 ipm rapid traverse in X, Y, Z X C
      • +/- 0.000078" positioning accuracy
      • +/- 0.000039" repeatability
    • Kitamura Mycenter 3XiF CNC 3 Axis Mill
      • Specifications:
      • 35.4 X 16.1 table size
      • 13 X 18 table travel
      • 9” CNC fourth axis
      • 15,000 RPM maximum spindle rotation
      • 30 station tool changer
      • 1.2 second tool change time
      • 1,969 X 1,969 X 1,969 ipm rapid traverse in X, Y, Z X C
      • +/- 0.000078” positioning accuracy
      • +/- 0.000039” repeatability
      • Fanuc Series 16i-MB Controller
    • Kitamura Mycenter-2X CNC 3 Axis Mill
      • Specifications:
      • 14.0" X 30.9" table size
      • 20" X 14" X 18.1" table travel in X, Y, Z
      • 20,000 RPM maximum spindle rotation
      • 24 station tool changer
      • 1.2 second tool change time
      • 1,969 X 1,417 ipm rapid traverse in X, Y, Z X C
      • +/- 0.000078" positioning accuracy
      • +/- 0.000039" repeatability
    • OKK VM5 III CNC 3-Axis Mill
      • Specifications:
      • 22” X 42” table size
      • 40.15” X 20.08” X 20.08” table travel in X, Y, Z 10,000 RPM maximum spindle rotation
      • 30 station tool changer
      • 2.0 second tool change time
      • 1,417 X 1,417 X 1,181 ipm rapid traverse in X, Y, Z X C
      • +/- 0.00012” positioning accuracy
      • +/- 0.00008” repeatability
      • Fanuc Series 160 is-MB Controller
    • OKK VM5 II CNC 3 Axis Mill
      • Specifications:
      • 22" X 42" table size
      • 40.15" X 20.08" X 20.08" table travel in X, Y, Z
      • 14,000 RPM maximum spindle rotation
      • 20 station tool changer
      • 2.0 second tool change time
      • 1,417 X 1,417 X 1,181 ipm rapid traverse in X, Y, Z X C
      • +/- 0.00012" positioning accuracy
      • +/- 0.00008" repeatability
      • Neomatic 635 controller
    • Brother TC-S2C-0 CNC Tapping Center
      • Specifications:
      • 31.5” X 12.6” table size
      • 27.6” X 15.7” X 11.8” table travel in X, Y, Z
      • 16,000 RPM maximum spindle rotation
      • 21 station tool changer
      • 1.7 second tool change time
      • 1,969 X 1,969 X 1,969 ipm rapid traverse in X, Y, Z
      • +/- 0.0002” positioning accuracy / 11.8”
      • +/- 0.00012” repeatability
      • Brother CNC Interface Unit
    • Hardinge VMC 1250II 3-Axis Mill
      • Specifications:
      • 54” X 26” table size
      • 50” X 26” X 25” table travel in X, Y, Z
      • 8,000 RPM maximum spindle rotation through geared head
      • 32 station tool changer
      • 7.0 second maximum tool change time
      • 1181 X 1181 X 1181 ipm rapid traverse in X, Y, Z X C
      • +/- .0002” positioning accuracy
      • +/- .00008 repeatability
      • Fanuc 0i-MB Series Controller
    • Bridgeport VMC 760 XP3
      • Specifications:
      • 30” X 24” table size
      • 29” X 24” X 24” table travel in X, Y, Z
      • 12,000 RPM maximum spindle rotation
      • 30 station tool changer
      • 4.0 second tool change time
      • 1,690 X 1,690 X 1,410 ipm rapid traverse in X, Y, Z X C
      • +/- 0.0004” positioning accuracy
      • +/- 0.000016” repeatability
      • GE Fanuc Series 18i-MB Controller
    • Daewoo DMV 3016L Diamond Series 3 Axis Mill
      • Specifications:
      • 36.2" X 16.9" table size
      • 30" X 16.1" X 20.1" table travel in X, Y, Z
      • 12,000 RPM maximum spindle rotation
      • 24 station tool changer
      • 1.2 second tool change time
      • 1,417 X 1,417 X 1,259 ipm rapid traverse in X, Y, Z X C
      • +/- 0.000078" positioning accuracy
      • +/- 0.000039" repeatability
      • Fanuc i-series controller
    • Cincinnati VMC-500 CNC 3 Axis Mill - 2 each
      • Specifications:
      • 27.6" X 20.5" table size
      • 20.1" X 20.1" X 20.1" table travel in X, Y, Z
      • 8,000 RPM maximum spindle rotation
      • 21 station tool changer
      • 8.0 second tool change time
      • 1,047 X 1,047 X 1,047 ipm rapid traverse in X, Y, Z X C
      • +/- 0.00016" positioning accuracy
      • +/- 0.000039" repeatability
      • Acramatic 2100E series controller
    Lathes:
    • Ikegai Corporation Genesis 1208 CNC Lathe
      • Specifications:
      • 21.85 inch swing over bed
      • 11.8 inch maximum turning diameter
      • 21.85 inch maximum turning length
      • 6.1 inch X-axis travel
      • 22.4 inch Z-axis travel
      • 5,000 RPM maximum spindle rotation
      • 1,200 ipm rapid traverse
      • 12 station tool post
      • Fanuc i-series controller
    • Daewoo Lynx 220A CNC Lathe
      • Specifications:
      • 20.1 inch swing over bed
      • 12.6 inch maximum turning diameter
      • 12.7 inch maximum turning length
      • 6.9 inch X-axis travel
      • 13.0 inch Z-axis travel
      • 6,000 RPM maximum spindle rotation
      • 1,200 ipm rapid traverse
      • 12 station tool post
      • Fanuc i-series controller
    • Bridgeport EZ Path II SD CNC Lathe
      • Specifications:
      • 20 inch swing over bed
      • 10.5 inch maximum turning diameter
      • 60 inch maximum turning length
      • 11 inch X-axis travel
      • 60 inch Z-axis travel
      • 3,000 RPM maximum spindle rotation
      • 394 ipm rapid traverse
      • 12 station tool post
      • Bridgeport BPTC series controller
    • Hardinge Super Precision Tool Room Lathe
      • Specifications:
      • 11 inch diameter
      • 36 inch bed
      • 1-1/8 inch through the spindle
      • 3,000 maximum RPM (variable speed)
      • Accurite T glass scales, two axis
    Wire EDM:
    • Mitsubishi RA90 Wire EDM
      • Specifications:
      • 33.9" X 29.9" X 6.3" maximum workpiece dimensions (W x D x H)
      • 772 pounds maximum weight of workpiece
      • 22.5" X 18.8" table size
      • 12.6" X 9.8" X 6.5" table travel in X, Y, Z
      • .008" to .010" wire diameter
    • Sodick Mark EX EDW A320L Wire EDM
      • Specifications:
      • 27.5" X 20.0" X 6.9" maximum workpiece dimensions (W x D x H)
      • 550 pounds maximum weight of workpiece
      • 14.0" X 22.0" table size
      • 12.5" X 8.0" X 6.9" table travel in X, Y, Z
      • .004" to .010" wire diameter
  • Knee Mills:
    • Bridgeport 1 Manual
    • 2 - 2 Axis Programmable
  • Grinders:
    • Harig Super 612 Manual Surface Grinder
      • Specifications:
      • 6.0" X 12.0" table, manual magnet
      • 16.0" X 7.0" X 12.0" table travel in X, Y, Z
      • 3,450 RPM spindle rotation

  • Raw Material Processing:
    • Rollinsaw manual band saw - 2 eachGrobe Inc.
    • Vertical Bandsaw, Model NS-18
  • Material Finishing:
    • C&M Cleaning Systems Model 600 large media tumbler
    • Zero Blast-N-Peen Clemco Industries Grit Blasting Cabinet
      • 3’ X 3’ X 3’ enclosure

      Buffing/Polishing Center Baldor

  • Inspection Equipment:
    • Brown & Sharpe Chameleon 7.10.7 CNC Coordinate Measuring Machine
      • Specifications:
      • 26" X 40" X 26" travel in X, Y, Z
      • .00019" Volumetric Deviation
      • .00011" X axis deviation
      • .00013" Y axis deviation
      • .00011" Z axis deviation
      • .00006" repeatability
      • Open PCDMIS 3.2 operating system
      • Renishaw PH-10MQ
      • TP20 dynamic touch probe
      • SP600M static scanning head
    • Mycrona Signum Multi Sensor Coordinate Measuring Machine
      • Specifications:
      • 400 X 400 X 200 travel in X, Y, Z
      • 1.5 micro meter + L/300 Volumetric Error
      • 1.5 micro meter + L/400 X axis deviation
      • 1.5 micro meter + L/350 Y axis deviation
      • 1.5 micro meter + L/350 Z axis deviation Geomatic 2.0 Operating System and Measuring Software
      • CCD camera system
      • Renishaw probe system TP200
      • Laser system
      • Software coupled rotary table
    • Brown & Sharpe Microval Manual Coordinate Measuring Machine
      • Specifications:
      • 14" X 16" X 12" travel in X, Y, Z
      • .0006" Volumetric Deviation
      • .0002" X axis deviation
      • .0002" Y axis deviation
      • .0002" Z axis deviation
      • .00016" repeatability
      • Micromeasure 1Plus operating system
      • Renishaw TP1S
    • Deltronic DH 216 Optical Comparator
      • Specifications:
      • 20X optics
      • 16" screen
      • MPC-5 Deltronic measuring system
    • Mitutoyo Surftest 212 surface finish tester
    • Fowler Sylvac Trimos V600
    • Brown & Sharpe Tesa Hite
    • Mitutoyo QM-Height 600 Height gage
    • Sylvac Z_Cal 300 Height gage
    • Gage Blocks, grade 2
      • 81 piece
    • Gage Pins, class Z, minus
      • .011" through 1.000"
    • Deltronic TP-25 gage pin sets, Class X, 1/16" through 5/8" by 1/16" steps
    • Deltronic PPM-25 gage pin sets, Class X, 1mm through 12mm by 1mm steps